Technical Library
Practical reference notes for discussing cooling tower, chiller, refrigeration and fan requirements. These explanations are introductory selection guidance; use project-specific calculations, current manufacturer data and applicable standards for equipment approval.
Cooling & Airside Engineering
Cooling Tower Range and Approach
Range = hot-water inlet temperature − cold-water outlet temperature. Approach = cold-water outlet temperature − entering-air wet-bulb temperature. A smaller approach generally requires more demanding heat and mass transfer duty; achievable performance depends on design wet-bulb, airflow, water flow, fill and site conditions.
Heat Rejection and Water Flow
The sensible water-side heat rate is Q = ṁ × cp × (T_hot − T_cold), using consistent units and water properties at the operating condition. Evaporative heat and mass transfer, water loss and air properties require further assessment; this equation alone does not select a tower.
Airflow and Static Pressure
A fan must be selected at the intersection of its pressure–flow curve and the installation’s resistance curve. Free-air volume is not the airflow delivered through a coil, fill or ductwork. Confirm rotational direction, speed, air density, motor power and sound requirements.
Closed-Circuit Cooling and Condenser Duties
For closed-circuit cooling, provide process fluid and concentration, temperatures, flow, ambient design conditions and pressure-drop limit. For condensers, identify refrigerant, condensing temperature or pressure, total heat rejection, design ambient and material and safety constraints.
Replacement Workflows & Technical Articles
From a Failed Cooling Fan to a Replacement Proposal →
A step-by-step guide to collecting site photographs, fan nameplate, electrical and airflow information and dimensions before reviewing a replacement.
Replacement Parts Checklist
Send the existing make/model, component dimensions, photographs, material, operating temperatures, water quality and installation details. For fans and motors include voltage, phase, frequency, speed, current, power, IP rating and mounting details.